mx01 j-31 j backplane connector systems fe a tures and specific a tions 2.00mm (.079") pitch hdm* board-to-board daughterboard power module 73651 right angle 3-blade module features and bene?s 15a per blade current car r ying capacity female on backplane for safety 3 mating lengths for live insertion 12mm module can be distributed between signal modules as needed integral stiffener combines signal, power and guidance modules metric connector in futurebus form factor surface mount compatible reference information product speci?ation: ps-73651-1998 packaging: tube ul file no.: e29179 mates with: 73656 designed in: millimeters electrical current: 15.0a dielectric withstanding voltage: 1000v insulation resistance: 1000 m ? min. mechanical insertion force: 55n max. per press-fit pin retention force: 15n min. per press-fit pin mating force: 2.5n max. per contact unmating force: 0.15n min. normal force: 1.0n min. durability: 250 cycles physical housing: liquid crystal polymer contact: blades?.5mm thick copper receptacle?.4mm beryllium copper alloy plating: 30 " gold operating temperature: -55 to +105?c catalog drawing (for reference only) 0.71 .028 dia plated thru hole typ 0.838 0.0330 dia drilled hole note: solder tail version shown ordering information and dimensions * high density metric and hdm plus are trademarks of teradyne, inc. note: the versions listed here have 3 mating levels: m1-short, m2-medium and m3-long, please contact molex for more information module termination o rder no. dimension p daughter card power module solder tail 73651-0033 2.00 (.079) solder tail 73651-0133 2.50 (.098) solder tail 73651-0233 3.00 (.118) solder tail 73651-0333 3.50 (.138) solder tail 73651-0433 4.00 (.157) solder tail 73651-0xxx contact molex press-fit 73651-1xxx 3.50 (.138) application note: connectors are ordered as part of an assembly, not individually the hdm and hdm plus daughtercard connectors are composed of modules. the complete connector with a number of modules, stiffener and hold-downs is given a specific part number so that a user only needs to order one connector. we show the individual modules in this catalog, but they are always delivered as completed connectors on a stiffener. on the customer print for the stiffener is the complete pcb footprint showing holes for signal and power contacts, plus appropriate mounting holddown features. most customers use solder-to-board versions of the ra receptacles, but press-fit ra receptacles are an option.
|
